bus14_top.gif
Flawmark-EC
bus14_sidenav.gif
bus14_sidenav_ona.gif
Home
ECT Products
Defect Detection
Flawmark EC
Contact Us
Flawmark -EC is an advanced Eddy Current Test System for non-destructive inspection of tubes and wires made of ferromagnetic, austenitic and non-ferromagnetic material. Defects such as cracks, pin holes, open welds, voids, inclusions, concentrated porosity, weld defects, mechanical damages, slivers, opened up skin laminations and deep pitting are reliably detected and logged by the system.

Flawmark-EC is powered by an embedded Pentium processor, which enables implementation of several unique features. The system can be used in four site-configurable modes - Online, Inline, Offline and Continuous.

The system can be used with encircling coils for inspection of the entire tube, or with segment test head for inspection of weld zone. The inspection can be carried out as per various standard specifications such as API, DIN, ASTM, BS, ETTC, JIS, IS or other relevant international standards. It can also be used in lieu of hydraulic testing for leak tightness, thus removing a bottleneck.

Simultaneous multifrequency test options are available.

An impressive array of features makes this the leading test systems for inspection of tubes and wires.
Download Brochure..
ECT for seamless and welded tubes, wires and bars
Test Coils, Mag/Demag Coils
Mechanical Handling Systems
technofour007001.jpg
Brochure for Accessories
technofour001001.jpg