Flawmark-SP is a versatile Eddy Current Test System with an amazing set of features and specifications. The system is specially crafted for single frequency non-destructive inspection of tubes and wires made of ferro-magnetic, austenitic and non-ferrous metals. Defects such as cracks, pin holes, open welds, voids, inclusions, concentrated porosity, weld defects, mechanical damage, slivers, opened up skin laminations and deep pittings are reliably detected and marked by the system. The system is meant for detection of predominantly transverse defects on tubes, wires and wire rods.
The versatility of the system allows it to be employed in several configurations. It can be used in online (before cropping the tubes), inline (right after cropping the tube), offline (stand-alone with a separate handling system) as well as in continuous (coiler- decoiler) site modes. The system supports both encircling as well as segment test heads. Inspection can be carried out as per API, ASTM, BS, DIN, ETTC, JIS, IS or other relevant standards.
Flawmark-SP comes with a differential channel as standard. An absolute channel can be added as an option. A modern Graphical User Interface with color monitor and keyboard makes operation of the system very easy and intuitive. The system can also stream data over an RS-232C serial link. The system can be supplied in a floor-mount full height cabinet or a table- mount half height cabinet.
Mechanical handling systems and automatic sorting systems are also available.
Low Cost Solution for ECT of Tubes and Wires